View current

Health and Safety Management Reporting Procedure

This is the current version of the approved document. You can provide feedback on this document to the Enquiries Contact - refer to the Status and Details tab from the menu bar above.

Section 1 - Purpose and Scope

(1) This Procedure outlines the process for health, safety and wellness reporting at The University of Queensland (UQ). It supports UQ’s Health, Safety and Wellness Policy, which provides UQ’s commitment to:

  1. the continuous improvement in the prevention of injuries, illness and incidents; and
  2. maintaining an occupational health and safety management system in accordance with relevant legislative obligations.

(2) This Procedure should be read in conjunction with the Health and Safety Risk Management Procedure and the Health and Safety Consultative Mechanisms Procedure.


(3) UQ regards the health, safety and wellness of its people as an ethical and moral responsibility. Uncontrolled safety and compliance risk are non-negotiable as UQ aspires to zero harm for all staff, students, visitors, controlled entities, contractors and volunteers across all University operations and sites. UQ acknowledges that it has health and safety obligations under the Work Health and Safety Act 2011 (the WHS Act), the Work Health and Safety Regulation 2011 (WHS Regulation) and other relevant safety-related legislation. 

Top of Page

Section 2 - Process and Key Controls

(4) UQ’s Health, Safety and Wellness Division (HSW Division) will ensure UQ’s senior management and risk management committees are regularly updated and informed of the health and safety risks that UQ may be exposed to through its activities and operations.

(5) The HSW Division will report regularly and/or as required to the following groups at UQ:

  1. Vice-Chancellor's Risk and Compliance Committee (VCRCC), with consequential reporting to Senate Risk and Audit Committee (SRAC);
  2. University Senior Executive Team (USET);
  3. Other groups, as required.

(6) HSW Division reporting will be informed by the following sources:

  1. UQ Health and Safety Committee meeting minutes and ad-hoc notifications or advice;
  2. Staff and student (and others’) reports of incidents, hazards and near misses in UQSafe;
  3. Risk assessment and management information in UQSafe;
  4. UQ Reportal;
  5. UQ workers’ compensation data;
  6. Regulator notifications;
  7. Internal HSW Audit Program;
  8. Institutional Biosafety Committee (IBC).

(7) UQ’s health and safety reporting structure is illustrated in figure 1 below.

Top of Page

Section 3 - Key Requirements

(8) HSW reporting is conducted in a variety of ways across UQ. Whilst some areas have specific reporting requirements, HSW can form part of these rather than necessarily being a stand alone item. It is preferable that HSW is integrated into UQ processes and discussions as ‘business as usual’ rather than an ‘add-on’ to be dealt with separately.

Health, Safety and Wellness Division Reporting

(9) To provide assurance to UQ’s senior management and risk management committees, the HSW Division will report regularly on the following matters:

  1. the operational performance of Faculties, Institutes and Central Support Services (CSS) in relation to workplace health and safety practices and compliance;
  2. regulatory changes that apply to UQ’s operations, including changes to relevant legislation, standards, codes or other compliance related instruments; and
  3. identification of health and safety risks that may impact the health, safety or wellbeing of the UQ Community or the strategic objectives of UQ.

UQ Health and Safety Committee Reporting

(10) To support and inform the HSW Division's assurance practices, all UQ Health and Safety Committees in Faculties, Institutes and in CSS will provide minutes of meetings to the HSW Division. The minutes of the meetings are to reflect the requirements of Health and Safety Consultative Mechanisms Procedure. Local HSW Managers will report these key issues to the HSW Division through committee minutes as well as other relevant and effective means. In addition, a member of the HSW Division also sits on each Faculty, Institute and the CSS Health and Safety Committees.

(11) The HSW website lists all UQ Health and Safety Committees and their contacts.

Incident Notification Reporting

(12) UQSafe is provided for all staff and students to report incidents, hazards and near misses (refer to the Health and Safety Incident and Hazard Reporting Procedure).

(13) UQSafe is maintained and used by the HSW Division to inform reporting to senior management and risk committees. The system also meets the criteria for workers’ compensation legislation in providing information on potential workers’ compensation claims. UQSafe is designed to be used at the local level for the reporting of incidents, hazards and near misses and allows local management oversight and direct action to manage these incidents and inform preventative activities and programs at the Organisational Unit level.

Risk Assessments

(14) UQSafe is UQ’s system for conducting health and safety risk assessment at the organisational unit level. It follows the four step risk assessment process of:

  1. identify the hazards;
  2. assess the risk;
  3. control the risks; and
  4. review risk controls.

(15) Refer to the Health and Safety Risk Assessment Procedure for more detailed information and requirements for conducting risk assessments at UQ.

(16) UQSafe is maintained and used by the HSW Division to inform reporting to senior management and risk committees. UQSafe is designed to be used at the local level to manage risks and inform Organisational Unit management of the work area’s risk position.

Top of Page

Section 4 - Roles, Responsibilities and Accountabilities

Health, Safety and Wellness Division (HSW Division)

(17) The HSW Division provides strategic direction, leadership and coordination for UQ’s health, safety and wellness functions and obligations. The HSW Division is responsible for advising Senate and the Vice-Chancellor and President of UQ’s health and safety practices, performance, obligations, improvement measures and risk exposures. The HSW Division will achieve this by:

  1. monitoring UQ’s progress and performance against its health, safety and wellness objectives, legislative obligations and key performance indicators;
  2. collecting and analysing information reported from staff, students and Health and Safety Committees;
  3. using UQ’s health and safety network (including Work Health and Safety Coordinators and Health and Safety Representatives) to communicate with staff and students and to receive feedback;
  4. consulting regularly with staff, students, UQ Health and Safety Committees, UQ’s HSW Managers, Work Health and Safety Coordinators and Health and Safety Representatives; and
  5. reporting to SRAC, the VCRCC and USET regularly, or as required.

UQ Health and Safety Committees

(18) UQ Health and Safety Committees are responsible for consulting with and reporting regularly to their own senior management committees and to the HSW Division on the outcomes of meetings and other matters as required by the Health and Safety Consultative Mechanisms Procedure. Minutes and actions from Health and Safety Committee meetings are presented to Faculty, Institute and CSS senior management meetings for review and action if required.

(19) Health and Safety Committees should regularly review health and safety risk registers and HSW management plans for the Operational Units that are members of the committee. These documents aid in determining the top safety risks for the Faculty, Institute or CSS. Health and safety risk registers and HSW management plans are presented to the senior management group of the Faculty, Institute and to the portfolios of the CSS areas and are presented at the first Health and Safety Committee meeting of the calendar year for approval and endorsement by the Chair.

(20) Local health, safety and wellness staff have a critical role in supporting Health and Safety Committees and their effective functioning.

Top of Page

Section 5 - Monitoring, Review and Assurance

(21) A representative from the HSW Division is an ex-officio member of each Faculty, Institute and CSS Health and Safety Committee and provides feedback to each committee on the activities of the HSW Division, legislative updates as well as any specialist information that may be required. HSW mangement plans are reviewed by the HSW Committee at each meeting. Progress is monitored, including any actions arising from inspections, audits and significant investigations.

(22) Reports provided to senior management meetings are reviewed by the Director, Health Safety and Wellness prior to submission and will ensure relevant items are raised.

(23) The Director, Health Safety and Wellness is responsible for the implementation and communication of this Procedure, including ensuring that Faculties, Institutes and CSS are informed of their HSW reporting obligations.

(24) The HSW Division will:

  1. review this Procedure as required to ensure that it remains accurate and relevant to the management of health, safety and wellness reporting at UQ; and
  2. monitor Faculty, Institute and CSS compliance with the requirements of this Procedure.
Top of Page

Section 6 - Recording and Reporting

(25) In addition to its reporting requirements outlined in clause 17, the HSW Division will provide:

  1. an annual report to the USET, VCRCC and SRAC;
  2. Senior Management with items of importance or that require their attention as required; and
  3. regular performance updates to senior management (e.g. USET).

(26) Health and Safety Committees are provided with reports, including HSW performance data from the local HSW Manager or Work Health and Safety Coordinator. 

Top of Page

Section 7 - Appendix


Term Definition
Central Support Services (CSS)  The area of UQ that sits outside a Faculty or Institute. This area includes Organisational Units from the portfolios of the Chief Operating Officer, Deputy Vice-Chancellor (Research and Innovation), Deputy Vice-Chancellor (Academic), Provost, Deputy Vice-Chancellor (Global Engagement), and the Office of the Vice-Chancellor and President.